Table of Contents
Advertisement
Available languages
Available languages
2. Press " " until you see "dur" and
symbol on the display screen. The symbol "
" will flash.
3. Select the desired cooking time period
using the "+" and "-" keys.
4. The current time will reappear on the
screen, and the symbols " " and
remain illuminated.
When the timer reaches zero, the oven will
switch off and an audible warning will
sound. The symbols " A " and "
flash.
Turn both control knobs to the "0" position
and press any key on the timer to stop the
warning sound. Press "
the
"A " symbol will disappear and the timer will
switch back to manual function.
Semi-Automatic Time Adjustment
(Finishing Time)
This function automatically starts the oven
so that cooking will finish at a set time. You
can set an end time of up to 10 hours after
the current time of day. Prepare the food for
cooking and put it in the oven.
1. Select the desired cooking function and
the temperature using the control knobs.
2. Press " " until you see "End" and
symbol on the display screen. " " and the
current time of day will flash.
3. Use the "+" and "-" buttons to set the
desired finishing time.
4. The current time will reappear on the
screen, the symbols " " and
illuminated.
When the timer reaches zero, the oven will
switch off and an audible warning will
sound. The symbol " " and
Turn both control knobs to the "0" position
and press any key on the timer to stop the
sound.
Press
" "
for 2 seconds the
symbol will disappear and the timer will
switch back to manual function.
will
" will
" for 2 seconds
will remain
will flash.
" "
EN - 18
Full-Automatic Programming
This function is used to start cooking after
a certain period of time and for a certain
duration. A time of up to 10 hours after the
current time of day can be set. Prepare the
food for cooking and put it in the oven.
1. Select the desired cooking function and
the temperature using the control knobs.
2. Press " " until you see "dur" symbol on
the screen. The symbol " " and
3. Select the desired cooking time period
using the "+" and "-" keys.
4. Press " " until you see "end" and
symbol on the screen. The time and the
symbols " " and
5. Select the desired finishing time using
the "+" and "-" keys. Add the cooking period
to the current time of day. You can set a
time of up to 10 hours after this.
6. The current time will reappear on the
screen, and the symbols " " and
remain illuminated.
The operating time will be calculated and
the oven will automatically start so that
cooking will finish at the set finishing time.
When the timer reaches zero, the oven will
switch off, an audible warning will sound
and the symbols " "," " and " " will flash.
Turn both control knobs to the "0" position
and press any key to stop the sound.
" "
for 2 seconds the
disappear and the timer will switch back to
manual function.
Sound Adjustment
Press and hold the "-" sensor button until
you hear an audible 'beep' sound. After
this, each time the "-" button is pressed,
a different 'beep' tone will sound.
are four different types of signal sounds. If
"off" is selected, all sounds will be turned
off except alarm and error sounds press
any buttons. After a short time the selected
beep will be recorded.
Key Lock Function
The key lock is used to avoid unintentional
changes to oven settings.
To activate the key lock, touch the PLUS
and MINUS sensor buttons for 2 seconds
will flash.
will flash.
will
Press
" "
symbol will
There
Advertisement
Chapters
Table of Contents
