Asus ROG KERIS WIRELESS P513 - Wireless Gaming Mouse Manual
DPI 3 (Default)
100 DPI to 16000 DPI
* You may customize the DPI settings for DPI 1-4 through Armoury Crate or the DPI on-the-fly tuning function.
USB Type-C® connector
Connection mode switch
Default lighting effect
Removing the USB Dongle
Replacing the USB Dongle
Replacing the switches
Replacing the side buttons
Replacing the mouse feet
Connecting your gaming mouse
Setting up your gaming mouse as a wired mouse
Connect the bundled USB Type-C® to Type-A cable to your gaming mouse and a USB port on your computer
Setting up your gaming mouse as a RF wireless mouse
Connect the USB dongle to a USB port on your computer.
Set the connection switch to the RF 2.4G Wireless mode.
Setting up your gaming mouse as a Bluetooth wireless
Set the connection switch to the Bluetooth mode.
NOTE: To pair your gaming mouse to a different device, press and hold the Pairing button for 3 seconds until the LEDs on your gaming mouse start to blink blue. Once your gaming mouse has been successfully paired, the LED indicator on your gaming mouse will light up blue for 3 seconds.
The LEDs on your gaming mouse will turn red (breathing) when the battery power is below 25% in Bluetooth or RF 2.4G mode. You may charge your gaming mouse by using the bundled USB cable.
Updating the firmware and customization
Connect your gaming mouse to your computer using the bundled cable, then connect the USB dongle to a USB port.