Adjusting Gas Supply - Westfalia Wetekom Micro Torch HT-900 Instruction Manual

Ignition in several steps
1. Press the safety lock (4) down to lock audible.
2. Press and hold the trigger (5). The gas-air mixture
in the torch will be ignited. At the same time the
safety lock (4) returns back to the upper position
and activate again.
3. For continuous
mechanism for continuous burning (3) backwards
with the other hand. Unclasp the trigger.
4. You obtain a durable flame and can start working
with the torch.
5. To switch off, push the locking mechanism (3)
forwards and the flame goes out.

Adjusting Gas Supply

At any time you can change the intensity of the flame with the gas volume
control regulator (6). Turn the regulator left hand (small flame to direction "-")
or right hand (great flame to direction "+").
Adjust the flame, according your purpose to a length of approx. 10 – 30 mm. A
big flame is not profitably, gas will be wasted without any added performance.
Start-Up and Operation
operation push the locking
10
1
2
3
4