Biostar M7VKD Manual page 63

Chapter2
Reset Configuration Data
The system BIOS supports the PnP feature so the system needs to record which
resource is assigned and proceeds resources from conflict. Every peripheral
device has a node, which is called ESCD. This node records which resources
are assigned to it. The system needs to record and update ESCD to the memory
locations. These locations (4K) are reserved at the system BIOS. If Disabled
(default) is chosen, the system's ESCD will update only when the new
configuration varies from the last one. If Enabled is chosen, the system is forced
to update ESCDs and then is automatically set to the "Disabled" mode.
IRQ-3
IRQ-4
IRQ-5
IRQ-7
IRQ-9
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
DMA-0 assigned to
DMA-1 assigned to
DMA-3 assigned to
DMA-5 assigned to
DMA-6 assigned to
DMA-7 assigned to
The above settings will be shown on the screen only if "Manual" is chosen for the
resources controlled by function.
Legacy is the term, which signifies that a resource is assigned to the ISA Bus and
provides for non-PnP ISA add-on cards. PCI / ISA PnP signifies that a resource
is assigned to the PCI Bus or provides for ISA PnP add-on cards and peripherals.
Resources Controlled By
By Choosing "Auto(ESED)" (default), the system BIOS will detect the system
resources and automatically assign the relative IRQ and DMA channel for each
peripheral.
By Choosing "Manual", the user will need to assign IRQ & DMA for add-on
cards. Be sure that there are no IRQ/DMA and I/O port conflicts.
assigned to PCI / ISA PnP
assigned to PCI / ISA PnP
assigned to PCI / ISA PnP
assigned to PCI / ISA PnP
assigned to PCI / ISA PnP
PCI / ISA PnP
PCI / ISA PnP
PCI / ISA PnP
PCI / ISA PnP
PCI / ISA PnP
PCI / ISA PnP
PCI / ISA PnP
PCI / ISA PnP
PCI / ISA PnP
PCI / ISA PnP
PCI / ISA PnP
2-28
BIOS Setup