Biostar M7VKD Manual page 59

Chapter2
Video Off Option
This field determines when to activate the video off feature for monitor power
management.
Always Suspend ->On
Suspend ->Off (default)
All Modes ->Off
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank
(default)
Blank Screen
DPMS Support
Modem Use IRQ
This determines the IRQ, which can be applied in MODEM use.
3 (default)
4 / 5 / 7 / 9 / 10 / 11 / NA
Soft-Off by PWRBTN
Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system has "hung."
The Choices: Delay 4 Sec, Instant-Off (default)
Wake Up Events
If you highlight the literal "Press Enter" next to the "Wake Up Events" label and
then press the enter key, it will take you a submenu with the following options:
VGA
When set to On, any event occurring at a VGA port will awaken a
system which has been powered down.
The Choices: OFF (default), ON
This selection will cause the system to turn
off the vertical and horizontal
synchronization ports and write blanks to
the video buffer.
This option only writes blanks to the video
buffer.
Initial display power management
signaling.
2-24
BIOS Setup