Chapter2
Onboard Parallel Mode
Select an operating mode for the onboard parallel (printer) port. Select Normal
unless you are certain your hardware and software both support EPP or ECP
mode.
The Choices: Normal (default), EPP (Enhanced Parallel Port),
ECP Mode Use DMA
Select a DMA channel for the parallel port for use during ECP mode.
The Choices: 3 (default), 1.
Parallel Port EPP Type
Select a DMA Channel for the port.
The Choices: EPP1.9 (default), EPP1.7.
ECP (Extended Capabilities Port), ECP/EPP
2-21
BIOS Setup