Panasonic EH5311 Service Manual page 6

(9) Install the Main switch plate, Main switch, Leadwire at the position as shown in Figure 8.
(10) Set power cord, bushing as shown in Figure 8.
(11) Install Capacitor (in case of Taiwan & Korea model)
as shown in Figure 8.
(12) Assembly handle A with handle B and drive with
2 torque screw as shown in Fingure 9.
(13) Assembly air inlet grill into back housing .
First ; Guide of Air inlet grill touch with Guide of back housing.
Second ; turn to clock wise direction . And then drive tapping screw size 2.6x8 as shown in Figure 10.
Figure 9
Screw size 2.6x8
Figure 10