Advertisement
3 ASSEMBLY INSTRUCTIONS
( * ) Caution for soldering lead wire on Main switch
Location and orientation of lead wire
must be as shown in Figure 1.
(1) Assembly the heater into slots of motor block assembly as shown in Figure 2.
(2) Soldering White(220V) / Gray(110V) and Blue(220V) / Black(110V)
lead wire into the heater shown as in Figure 3.
Lead wire (Black)
(3) Soldering lead wire Red from power cord into heater block assembly as shown in Figure 4.
Lead wire (Blue)
Lead wire (Gray)
<For Taiwan>
Lead wire red from power cord
<For Taiwan>
Lead wire (Yellow)
Lead wire (Black)
Lead wire (Orange)
Lead wire (Violet)
<For Taiwan>
Lead wire white (220V) / gray (110V)
Lead wire (Blue)
<For Korea>
<For Korea , Other>
Lead wire
(Blue)
Lead wire (Red)
Lead wire
(Yellow)
Lead
wire
Lead
wire
Lead wire
Lead wire from
Lead wire
power cord
from
power cord
<For Korea>
<For Other>
Figure 1
Lead wire blue (220V) / black (110V)
Figure 2
Lead wire (White)
Lead wire (Blue)
<For Other>
Figure 3
Lead wire red from power cord
Figure 4
Lead wire
Lead wire
(Yellow)
Lead wire
(Orange)
Lead wire
(Red)
Lead wire (Brown)
Lead wire (White)
Advertisement
