tams elektronik GBM-8 Manual page 4

English
Checking the package contents
Please make sure that your package contains:

one kit, containing the components listed in the parts list (à page
14) and one PCB or

one ready-built module or

one ready-built module in a housing (complete unit);

components for the auxiliary circuit for the functional test:

2 resistors 1 kW, 1 diode 1N4148, 1 LED;

a CD (containing the manual and further information).
Required materials
For assembling the kit you need:

an electronic soldering iron (max. 30 Watt) or a regulated soldering
iron with a fine tip and a soldering iron stand,

a tip-cleaning sponge,

a heat-resistant mat,

a small side cutter and wire stripper,

as necessary a pair of tweezers and long nose pliers,

electronic tin solder (0,5 mm. diameter).
For testing the module you need an electric light bulb.
In order to connect the module you need wire. Recommended
diameters: > 0,25 mm² for all connections (e.g. item no. 73-1031x,
x=0..9).
If you want to display the busy status you need LEDs and suitable
series resistors.
GBM-8
Page 4