Microprocessor Control - Mitsubishi Electric MLZ-KY06NA - U1 Service Manual

8

MICROPROCESSOR CONTROL

MLZ-KY06NA
WIRELESS REMOTE CONTROLLER
Operation display section
Temperature buttons
NOTE: Last setting will be stored after the unit is turned OFF with the remote controller. Indoor unit receives the signal of the
remote controller with beeps.
INDOOR UNIT DISPLAY SECTION
Operation Indicator lamp
The operation indicator at the right side of the indoor unit indicates the operation state.
•The following indication applies regardless of shape of the indication.
Indication
The unit is operating to
reach the set temperature
The room temperature is
approaching the set tem-
perature
Standby mode
(Refer to multi system
operation)
OBH922
Signal transmitting section
Distance of signal: About 20 ft. (6 m)
Beep(s) is (are) heard from
the indoor unit when the
signal is received.
Battery replacement indicator
Operation select button
OFF/ON
(stop/operate) button
ECONO COOL button
Indication of
remote controller
model is on back
Operation state Room temperature
About 4°F(2°C) or more
away from set tempera-
ture
About 2 to 4°F(1 to 2°C)
from set temperature
SLEEP button
SMART SET button
-
12
Operate the remote control-
ler in the area where signal is
received, and beep is heard.
90°
FAN speed control button
WIDE VANE control button
VANE control button
TIME, TIMER set buttons
Increase time
Decrease time
WEEKLY TIMER
set button
RESET button
CLOCK button
Lit
Blinking
Not lit