Zanussi ZCG91016XA User Manual page 24

3. Assemble the burner in a reverse sequence.
Before you fix the screw, make sure that the
burner is pushed correctly to the back panel.
Test the grill injectors.
LEVELLING
CAUTION! Remove all the
accessories from the oven.
CAUTION! The assembly should be
made by two people.
1. Open the lid of the appliance and disassemble
it.
2. Disassemble the pan supports and all the
burner assemblies.
3. Tilt the cooker backwards 30 degrees.
24
4. With the help of a second person who
supports the cooker from falling, fold the front
feet into the holes in the plinth.
5. Tilt the cooker forward 30 degrees and repeat
the previous step for the back feet.
6. Carefully lay the cooker on the floor. If the floor
is not equally flat, use the adjustable feet on the
30°