Functions and Modes
You can cycle through the modes by pressing MODE button. If your camera is not
connected to a computer, you can only access the Record and Playback Modes. If
your camera is connected to a computer, you can access the additional two
modes.
Power On
Power
Power On/Off
Press the Power Button to activate your Camera. Press it again and hold about
three seconds to turn this camera off. Using this camera is really easy.
You can simply point and shoot. First, you have to make sure you are in the
Recorder Mode. Then use the LCD viewfinder to guide you. You can then press the
Shutter Button to take your first picture. That's so easy.
Power Low
If your battery is about to run out, you will see a dead battery icon (
on the top center of the LCD. Your camera will turn off itself in 5 seconds.
Record Mode
Playback Mode
Without USB connection
Mass Storage Mode
PC Camera Mode
With USB connection
(USB Portable Disk)
) shown
6