Care & Maintenance - Ninja Kitchen System Pulse BL201C Owner's Manual

Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is unplugged
from the power source before inserting or removing any
attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into water or
any other liquid.
1
Separate/remove all parts from each other.
2
Clean the motor base and gear shaft with a damp cloth and
wipe dry.
3
Place the bowl and Nutri Ninja
Place the lids and attachments on the top rack. Use
caution when handling the blade assemblies as the
blades are very sharp.
NOTE: You may also wash the containers by filling the
container with no more than 0.75 L of warm water and a
drop of dish washing detergent, placing the corresponding
lid on the container and pulsing a few times. Do not fill the
container with more than 0.75 L of water because it will
overflow. Once clean, remove the container from the motor
base. Rinse the container, attachment and lid under running
water. Allow all the parts to dry before storing.
Please call customer service if any servicing needs to be
performed on the appliance at 1-877-646-5288.
14 1-877-646-5288
cups in the dishwasher.
™
HOW TO STORE
1 Store the Ninja Kitchen System Pulse
®
the 1 L bowl on the motor base, Total Crushing
assembly inside and lid on the bowl. Secure the power
cord underneath the base by wrapping the cord around the
cord wrap. Do not place anything on top. Store the Nutri
Ninja cups and the rest of the attachments along side the
™
appliance where they will not be damaged and won't cause
a hazard.
RESETTING THE MOTOR THERMOSTAT
The Ninja Kitchen System Pulse
®
system which prevents damage to the unit's motor and drive
system should you inadvertently overload your appliance. If the
appliance is being overloaded, the motor will stop. To reset the
appliance, follow the resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the container and ensure that no food is
jamming the cutting blades or attachments.
3
Allow the appliance to cool for approximately 30 minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as before making sure not to
exceed the recommended maximum capacities.
™ upright with
Blade
™
features a unique safety
™