Related Manuals for Ninja Pulse BL202NZ
Summary of Contents for Ninja Pulse BL202NZ
- Page 1 ® Pulse™ BL202NZ OWNER’S GUIDE BL202NZ_30_IB_ENG_120626_3.indd 1 12-06-26 12:57 PM...
-
Page 2: Important Safety Instructions
PRECAUTIONS SHOULD ALWAYS SHOCK OR INJURY: BE FOLLOWED, INCLUDING THE 1. To protect against electrical shock, FOLLOWING: do not submerge the appliance or allow the power cord to come into READ ALL INSTRUCTIONS contact with water or any other BEFORE USING YOUR NINJA ® liquid. KITCHEN SYSTEM PULSE™. 2. DO NOT allow young children to operate the appliance or use as a IMPORTANT: This appliance can toy. Close supervision is necessary be used by children aged from 8... - Page 3 19. DO NOT expose containers to 8. Always use appliance on a dry, level surface. extreme temperature changes. 9. Keep hands, hair, clothing, as well 20. DO NOT blend hot liquids. as utensils out of container while 21. DO NOT overfill. processing to reduce the risk of 22. DO NOT operate the appliance severe injury to persons or damage empty. to the appliance. A scraper may be used but only when the appliance is 23. CAUTION: When mixing pizza not running. dough or any heavy mix such as bread dough or pastry dough, 10. CAUTION: Blade assembly is sharp, mix for up to 1 minute, then let the handle with care. When handling appliance rest for approximately the blade assembly, always hold by 1 minute before mixing again the shaft or collar. to prevent overheating of the 11. Avoid contact with moving parts. appliance.
- Page 4 THIS BOOK COVERS MODEL NUMBERS: BL202NZ 30 TECHNICAL SPECIFICATIONS Voltage: 220-240V~, 50Hz. Power: 700 Watts Bowl Capacity: 1.1 Litre Single Serving Cup Capacity: 450 ml Z854 SAA120159EA BL202NZ_30_IB_ENG_120626_3.indd 3 12-06-26 12:57 PM...
-
Page 5: Table Of Contents
Contents Thank you for Kitchen System Pulse™ ..6 Getting to Know Your Ninja ® purchasing Assembling the Ninja Kitchen System Pulse™ ..... 8 ® the Ninja ® Assembly and Use for the Single Serve Cup ......9 Kitchen Assembly and Use for the Bowl ... ..........10 System Suggested Uses ................... 11 Pulse™. Care & Maintenance ................12 Troubleshooting Guide ..............13 BL202NZ_30_IB_ENG_120626_3.indd 4 12-06-26 12:57 PM... -
Page 6: Getting To Know Your Ninja ® Kitchen System Pulse
Getting To Know Your Ninja Kitchen System Pulse ® ™ a 1.1L Bowl Storage Lid g Single Serve Drink Cups (x2) b 1.1 L Bowl Lid with Locking Handle h 1.1 L Bowl c To-Go Single Serve Lids (x2) i Drive Gear d Cookie Paddle (1.1 L bowl) j Single Serve Blade e Dough Blade (1.1 L bowl) k Motor Base f 4-Blade Assembly (1.1 L bowl) l Power Cord (not shown) NOTE: Attachments are not interchangeable. BL202NZ_30_IB_ENG_120626_3.indd 5... - Page 7 Kitchen System Pulse™ is a high powered innovative tool with a compact The Ninja ® design and outstanding performance. It is perfect for ice crushing, chopping, blending, Kitchen System Pulse™ also features a unique kneading and complete juicing. The Ninja ® capability to knead dough for cookies, breads, pizza and more! Blend and go with the convenient single serve cup, create delicious drinks to get you out the door! Best results are achieved when you Pulse. FEATURES: • Ninja ® Blade Technology • 1.1 L Bowl and Single Serve Drink Cup - BPA Free • Cord storage • Pulse Power: Controlled blending, processing, juicing, and kneading by using short pulses. In short intervals, press down on the top of the single serve drink cup or the handle of the bowl lid and pulse to the perfect consistency.
-
Page 8: Assembling The Ninja ® Kitchen System Pulse
Assembling the Ninja Kitchen System Pulse™ ® PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE APPLIANCE: IMPORTANT: Always place the attachment in the 1.1 L bowl before adding any ingredients. IMPORTANT: Attachments are not interchangeable. CAUTION: Blades are sharp! Use extreme caution when handling the blade assemblies. Always hold them by the shaft. IMPORTANT: When mixing dough. Mix dough for up to 1 minute, then let appliance rest for 1 minute before mixing again. IMPORTANT: Never run the appliance empty. CAUTION: Never attempt to remove the container while the appliance is still running. -
Page 9: Assembly And Use For The Single Serve Cup
Assembly and Use for the Single Serve Cup ASSEMBLY PULSE REMOVAL Fig. 4 Fig. 5 Fig. 1 Fig. 2 Fig. 3 For best results, use short “PULSES”... Practice makes perfect!! 6 When you have reached your desired IMPORTANT: Make sure that the motor consistency, stop the appliance by base is plugged in for use. removing your hand from the single 1 Place the motor base on a clean, dry, serve cup. Then turn the single serve cup level surface such as a counter or table to the right (Fig. 4) and pull straight up top. to remove. (Fig. 5) NOTE: Do not overfill! To avoid spilling, 2 Add ingredients to the single serve cup. do not add ingredients past the “Max” fill 3 Place the single serve blade onto the cup line. -
Page 10: Assembly And Use For The Bowl
Assembly and Use for the Bowl ASSEMBLY PULSE REMOVAL Shaft Fig. 3 Fig. 5 Fig. 1 Fig. 2 Fig. 6 Fig. 4 It’s best to add the liquid ingredients first and then the dry ingredients. the lid with the arrow ( ) located on the IMPORTANT: Make sure that the motor bowl’s handle. (Fig. 3) base is plugged in for use. 7 Push down on the “PULSE” on the handle 1 Place the motor base on a clean, dry, to start the appliance. (Fig. 4) level surface such as a counter or table NOTE: Pulse ingredients for even top. chopping by pressing down in short 2 Align and lower the bowl onto the motor intervals. -
Page 11: Suggested Uses
Suggested Uses FUNCTION CONTAINER ATTACHMENT TYPE OF FOOD Onion Single Serve Mincing Blade Assembly Garlic 1.1 L Bowl Herbs Bread Dough Kneading* 1.1 L Bowl Dough Blade Pizza Dough Cookie Dough Dessert Bars Dough Mixing* 1.1 L Bowl Cookie Paddle Biscuits Scones Batters Smoothies Milkshakes Single Serve Blending Blade Assembly Frozen Drinks 1.1 L Bowl Dips Spreads Single Serve Cheese Grating Blade Assembly 1.1 L Bowl Bread Crumbs... -
Page 12: Care & Maintenance
Care & Maintenance HOW TO CLEAN HOW TO STORE CAUTION: Make sure that the motor 1 Store the Ninja Kitchen System Pulse™. ® base is unplugged from the power upright with the 1.1 L bowl on the motor source before inserting or removing any base, 4-Blade assembly inside and lid attachment and before cleaning. on the bowl. Secure the power cord underneath the base by wrapping the CAUTION: DO NOT immerse the motor cord around the cord wrap. Do not place base into water or any other liquid. anything on top. Store the single serve 1 Separate/remove all parts from each cups and the rest of the attachments other. along side the appliance where they will not be damaged and won’t cause a 2 Clean the motor base and gear shaft with hazard. a damp cloth and wipe dry. RESETTING THE MOTOR THERMOSTAT 3 Place the bowl and single serve cups Kitchen System Pulse™ features... -
Page 13: Troubleshooting Guide
Troubleshooting Guide PROBLEMS POSSIBLE REASONS & SOLUTIONS • Make sure the container is securely aligned and locked, (1.1 L bowl) on the motor base. • For the single serve cup, make sure that the tabs are seated in the slots and turned to the left. • Make sure the lid is securely on the container (1.1 L bowl) in the correct position with the arrows Motor Doesn’t Start or aligned. Attachment Doesn’t • Check that the plug is securely inserted into the Rotate. electrical outlet. • Check the fuse or circuit breaker in your electrical box. • The unit could be overloaded. Unplug and wait approximately 30 minutes before using again. • The unit could be overheated. Unplug the unit and wait 30 minutes to reset. • Either you are chopping too much food at once, or you Food is Unevenly are not pulsing properly. Remove some of the food Chopped. - Page 14 Notes Or Your Favorite Recipes BL202NZ_30_IB_ENG_120626_3.indd 13 12-06-26 12:57 PM...
- Page 15 ONE (1) YEAR LIMITED REPLACEMENT WARRANTY STATEMENT If your product becomes defective due to faulty material or workmanship within a period of 1 year from the date of purchase, we warrant to do the following: • For New Zealand Consumers: We will replace the product with a new product, free of charge, or repair the product at our cost, at our discretion.
- Page 16 Brand Brand Developers Developers Aust Aust Pty Ltd Pty Ltd Brand Brand Developers Developers Limited Limited Printed in China Z854 Illustrations may differ from actual product. SAA120159EA BL202NZ.E.120626.3 BL202NZ_30_IB_ENG_120626_3.indd 15 12-06-26 12:57 PM...
Need help?
Do you have a question about the Pulse BL202NZ and is the answer not in the manual?
Questions and answers