Parts List; Contents Of The Box; Carry Cot - Nuna IVVI carry cot Instruction Manual

Parts list

Make sure all parts are available before assembly. If any part is missing,
please contact local retailer. No tools are required for assembly.
1 Rain Cover (Carry 4 Carry cot cover
Cot Mode) 5 Handle

2 Carry Cot

6 Carry cot release
3 Canopy
1

Contents of the Box

Carry cot
Rain cover
10
7 Matress pad
8 Accessory bag
(maximum load =
button 2.86 lbs)
4
2
8
7
Carry cot
Carry Cot assemble
1 Open the wire support on both side of the carry cot.
the wire into the four plastic parts. A "Click" sound means the wire
support is secure.
smooth it down.
! Always use the mattress when using the carry cot.
3
! Mattress cover can easily be removed to wash.
2 Attach the pocket to the carry cot with zipper.
5
3 Attach the boot to the carry cot with the zippers on either side.
6
Adjust Carry Cot Canopy
1 Pull canopy towards front end to secure.
! Be sure the handle is locked at 90° in the forward most position before
lifting carry cot by the handle.
2 Close the canopy by pressing the folding buttons on both side.
Attach Carry Cot onto Chassis
1 Align the sides of the carry cot with the adapters on the frame.
2 Place the carry cot directly down until it clicks into place.
3 A click sound means carry cot assembled completely.
! Always remove the car seat adapters before using the carry cot.
! Do not fold stroller when carry cot is attached.
(1)
(1)-1
Place the mattress into the carry cot,
(3)
(4)
(6)
Then click
(2)
and
(5)
(6)-1
(7)
11