Table of Contents
Advertisement
1
Identify the right rudder from the left rudder (green sti-
cker = right ; red sticker = left)
Take the left rudder, position the washer as indicated on
the photograph, then align the rudder casting onto the
3
Repeat the proce-
dure for the right
rudder
assembly.
5
Take the yoke connection of the tiller extension and fix it
into the middle of the tiller crossbar.
7
Tiller crossbar & tiller extensions
gud-
geon
.
2
Insert the rudder pin, and do not forget to put in the
two split rings: one on top and one at the bottom of
the rudder pin.
4
Take the tiller crossbar and insert the right side
into the right rudder arm and the left side into the
left rudder arm.
6
Then fix the tiller head into the yoke connection as
shown on the photo.
Advertisement
Table of Contents
