Table of Contents
Advertisement
Trapeze
1
With one person on the trampoline and the
other toward the head of the mast, start lif-
ting the mast until the person on the trampo-
line can support the full weight.
3
The second person can now take the fores-
tay bridles. Make sure that they are not tan-
gled and attach them to the stay adjusters on
the bow tangs.
FIXING THE TRAPEZES
4
Release the trapeze lines from the base of the mast and ensure that they are
not tangled. Pass the trapeze shock cord under the trampoline and up
through the grommets behind the daggerboard shock cord. Assemble the tra-
peze adjuster line, rope locks, and trapeze lines and attach to the shock cord.
Trapezing height can be altered by adjusting the position of the rope lock on
the trapeze adjuster line.
CAUTION - DANGER - ALUMINIUM MAST
STAY AWAY OF ELECTRICAL WIRES
Before raising the mast ensure that it cannot
get in contact with electrical wires
2
The person on the trampoline now pushes
the mast into the fully upright position and
holds it in position. TIP : The second per-
son may assist in the above procedure. Once the
mast is in the fully upright position one person is
sufficient to hold it there.
10
Advertisement
Table of Contents
