Table of Contents
Advertisement
Cunningham & Righting line
1
Shackle the cunningham blocks into the grommet of the mainsail tack. Take the cunningham line and
feed as follows : (NB : the line must go through the inside of the rotation arm)
-
Start from the cunningham block ont the left side of the mast. Feed the rope into the cleat around the
sheave
push the cord up through the first sheave of the left block from back to front
-
take the rope back down, thread it through the left sheave at the base of the mast from front to back
-
take it up through the second sheave of the left block from back to front
-
take it back down and through the single block,
-
take it back up into the first sheave of the right hand block from front to back
-
take it back down through the sheave at the right of the mast base from back to front
-
take it up through the second sheave in the right block from front to back
-
finally thread the line through the cunningham block and in the cleat.
-
Attach each end of the cunningham line to the shrouds.
2
Take the righting line from the rope bag.
Attach it to the dolphin striker post under
the front crossbar (photo). Pass it under
the trampoline through the grommet at
the base of the mast. Fold up the end of
the line and stow it in the trampoline po-
cket at the base of the mast.
14
Advertisement
Table of Contents
