Operating Steps - Stratasys SUPER DT3 Manual

Operating steps

• The DT3 need to be filled with water manually.
• There is a water-level switch 2.54 cm (1 inch) below the top of the tank.
If the water level drops below this level, the DT3 CleanStation will not power
• DT3 can be used both for SU707 and SU706 models
• It is to use SU705 – Pump Damage
forbidden
• It is to use SU706 with heavy or standard grid – Pump Damage
forbidden
7 7 STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY