Table of Contents
Advertisement
Specifications
Washing machine size (depth, width, height) 75 x 92 x 102 cm (29.5 × 36.2 × 40.2 in.)
Washing tank size (depth, width, height)
Tank Capacity
Liquid volume
Machine weight
Shipping Size and Weight
Positioning
Control panel
Flow rate
Operating ambient conditions
Power requirements
Regulatory compliance
21
21
STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY
STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY
36 x 41.2 x 45.7 cm (14.2 x 16.2 x 18
67.8 liters
60 liters
143kg
86 x 122 x 102 cm
Make sure to maintain a minimum of 40 cm (12 inches) around
the CSIIP at all times for proper ventilation.
Ability to control the cleaning time duration. (Hr. / min)
Ability to set the cleaning flow rate: low, medium and high
strength.
Temperature 18 C-25 C (64 F-77 F); relative humidity 30-70%
(non-condensing)
Type I: 220V, 50/60Hz – for EMEA
Type II: 90-120V, 50/60Hz – for NA and Japan
CE
Chemical monitoring tested and found to be below threshold
Note: the connex 500
tray is 2 inches wider
than the washing cell.
in)*
A whole ,full tray of one
printed model will not fit
into the washing cell
Advertisement
Table of Contents
