Installation - Stratasys SUPER DT3 Manual

Installation

Selecting the location
• Leveled and stable table which can bear 55kg/100lbs
• Near sink or drain
• Near power socket
• Room temp should be 18°C - 25°C
Connecting the Drainage Hose
• Connect a standard ¾" garden hose to the hose fitting at the back of the unit
• Insert the drainage hose into a drain, sink, or container, according to local waste disposal regulations.
13 13 STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY