Staple Finishing / Sorting
NOTE: To staple documents, the optional finisher must be installed.
1
Load the document into the ADF or on the document glass.
Load the document into the ADF or on the document glass.
2
Select the copy mode.
3
Press [Finishing].
4
If the finisher has been installed: Select [Sort], [Shift] or [Shift Sort].
If the finisher has not been installed: Select [Sort].
5
If the finisher has been installed: Select [Staple], choose the
staple position and press [Enter].
If the finisher has not been installed proceed to step 6.
6
Press [Enter].
7
Select the number of copies you wish to make using the numeric
keypad.
8
Adjust any additional settings (ex. Resolution, Contrast).
9
Press <Start>.