Firmware Updates Dynamometer Cleaning Appendix A: Torque Measurements with the HHD Appendix B: Calculating Kilopascals with the HHD Appendix C: Apps and Upgrading the 01165A Appendix D: Symbol Glossary FCC Compliance Statement CE Declaration of Conformity The Lafayette Hand-held Dynamometer (HHD) is an ergonomic hand-held device used for objectively quantifying muscle strength.
Model 01165A/01165APP User Instructions Features • Designed for high inter and intra instrument reproducibility • Three, easy to change molded plastic stirrups with pads and a stainless steel algometer stirrup with 7/16” diameter tip • Force measurements in pounds, kilograms, kilopascals, or Newtons (user selectable) •...
Lafayette Hand-held Dynamometer Basic Operations The Lafayette HHD is small enough to be held in one hand and easily read. The size and weight of the HHD permit the examiner to use the same procedures and break test techniques described in the The unit is simply placed between the examiner’s hand and the limb being tested.
Model 01165A/01165APP User Instructions Function Buttons settings. POWER/MENU/SELECT Button: The round MENU/SELECT button is located on the bottom middle of the HHD. This is the button used to power on the device. Holding the MENU/SELECT placed for easy access regardless of right or left hand operation.
Lafayette Hand-held Dynamometer Screens Test Screen The Main Measurement Screen shows all measurement information that is being captured. This screen is shown whenever a measurement is in progress. Battery Indicator: Indicates the remaining capacity in the charge of the battery. Force over Time Graph Area: The graph displays the data for the previously conducted test, and automatically populates the chart to maximize the viewing area.
Page 7
Model 01165A/01165APP User Instructions Test Setup Menu Screen The Test Setup menu screen allows the user to select default or custom settings while also setup various test options for each custom setting. DEFAULT SETTINGS Selecting this will make the default settings ACTIVE.
Page 8
Lafayette Hand-held Dynamometer USE KPA Sets force to be measured using kilopascals. Note: Kilopascals can only be measured accurately using the included algometer attachment. TEST TIME Allows users to select maximum time for testing. PEAK ONLY Displays only the peak on the main screen, allowing for quick back-to-back testing. ARROW FUNCTION Sets the function of the arrow buttons on the Test Screen.
Page 9
Model 01165A/01165APP User Instructions Options Menu Screen The Options menu allows user to customize the setup of their unit. WIRELESS BACKLIGHT UNITS Allows selection of pounds (lbs), kilograms (kg), kilopascals (kPa), or Newtons (N). DATE Updates the HHD system date.
Disposable sanitary covers are available on the stirrup pad that comes into direct contact with the patient’s skin. Do not reuse disposable covers. Disclaimer: These cleaning instructions for Lafayette Instrument products are a recommendation of compatible cleaning materials only. Product end users are responsible for instituting an appropriate cleaning regimen utilizing best practices and techniques.
Model 01165A/01165APP User Instructions Appendix A: Torque measurements with the HHD In some research and rehabilitation applications, it is necessary to obtain torque measurements for the limb being tested. Torque is often a more accurate indicator of total strength because it takes into account the length of the muscle being tested.
Lafayette Hand-held Dynamometer Appendix C: Apps and Upgrading the 01165A The 01165A Lafayette Hand-held Dynamometer can be upgraded to the 01165APP using the Lafayette Hand-held Dynamometer Utility. Upgrading gives the device access to advanced features via the Lafayette Hand-held Dynamometer Utility or DynoData for iOS/Android devices.
Model 01165A/01165APP User Instructions Appendix D: Symbol Glossary The following glossary describes the symbols included on the device label. Some symbols may not apply to this device. Manufacturer Authorized Representative Indicates the medical device manufacturer Indicates authorized representative in ISO 15223-1:2016 Ref. 5.1.1 the EU ISO 15223-1:2016 Ref.
CE - Declaration of Conformity The following apparatus: Product Name: Hand-held Dynamometer Model Designation: 01165A Manufacturer’s Name: Lafayette Instrument Company Manufacturer’s Address: 3700 Sagamore Parkway North Lafayette, Indiana 47904 U.S.A. evaluation regarding the electromagnetic compatibility requirements, the following standards were applied: Electromagnetic Compatibility...
Page 15
Model 01165A/01165APP User Instructions This page intentionally left blank. Fax: (765) 423-4111 . www.lafayetteinstrument.com . info@lafayetteinstrument.com...
Page 16
Lafayette Hand-held Dynamometer Terms and Conditions complete the Form, or call Lafayette Instrument, you will receive a Return #. Your Return # number will be good for 30 days. Address the shipment to: LIC Worldwide Headquarters Lafayette Instrument Company 3700 Sagamore Parkway North...