Table of Contents
Advertisement
Model 01165A/01165APP
Test Setup Menu Screen
The Test Setup menu screen allows the user to select
default or custom settings while also setup various
test options for each custom setting.
DEFAULT SETTINGS
Selecting this will make the default settings ACTIVE.
The default settings are not able to be changed. The
default settings are as follows:
FORCE THRESHOLD
Start:
5 LBS
Start Force:
Stop Threshold:
ON
Stop Force:
0 LBS
ON
Auto Clear:
LBS
Units:
3.0 SEC
Test Time:
Peak Only:
OFF
CUSTOM SETTINGS
of the settings. It will also set that custom setting as ACTIVE. These settings can be renamed using the
DynoData mobile app.
START
Starting a test can either be done by passing a
FORCE THRESHOLD, after a certain amount of TIME
DELAY, or by triggered by the top button.
START FORCE/TIME DELAY
These options allow you to select customized force
thresholds and time delays.
STOP THRESHOLD
If enabled, the test will end when the force applied drops below the value set in STOP FORCE. If
disabled, the test will resume for the amount of time set by the TEST TIME.
STOP FORCE
If STOP THRESHOLD is enabled, each test will be stopped when the force is less than or equal to this
force. Stop force cannot exceed start force.
AUTO CLEAR
If enabled, manually clearing the data is not required prior to starting new tests.
Fax: (765) 423-4111 . www.lafayetteinstrument.com . info@lafayetteinstrument.com
User Instructions
SCROLL
Arrow Function:
OFF
Metronome:
Sound:
ON
Display 1:
TIME-PEAK
TOTAL TIME
Display 2:
AVG FORCE
Display 3:
RIGHT
Button Orientation:
7
Advertisement
Table of Contents
