Automatic Power Off - MAJORITY SNO-BAR-BLK Manual

 Please note: Using the native controls on your connected device, make sure the audio settings
are set to PCM or Optical Audio and are switched on.
Audio from the connected audio source will now be played through the speakers.
AUX/Line In Input
Plug one end of a 3.5mm audio input cable (included) into the 'LINE IN' port (Ref.9) on the unit. Before use,
disconnect any cables connected to the Stereo RCA Inputs.
Plug the other end of the cable into the audio output/ headphone output on an MP3 player or other audio
source.
Then press the 'INPUT' button on the remote control (Ref.22) or press the 'INPUT' button on the soundbar
(Ref.5) to choose the 'LINE IN' mode. The indicator light will turn green.
Audio played through the connected device will now be heard through the speakers.
Bluetooth
Then press the 'INPUT' button on the remote control (Ref.22) or press the 'INPUT' button on the soundbar
(Ref.5) to choose the Bluetooth mode. The indicator light will �ash blue.
From your Bluetooth device, select the "Majority Snowdon" when prompted to choose a Bluetooth device.
If a password is required, enter "0000". If you encounter issues at this stage, please refer to the user manual
for your Bluetooth device for instructions on pairing and connecting Bluetooth devices.
When successfully connected, a beep will issue from the unit and a solid blue light will be displayed. After the
initial pairing, the unit will stay paired unless manually unpaired by the user, or until the device is reset.
If your device should become unpaired or you �nd it is unable to connect, repeat the above steps.

Automatic Power Off

The Majority Snowdon Soundbar will automatically go into sleep mode after 180 minutes if the TV is off.