Advertisement
MTA128NT/ST Quick Start Guide
Configuring your TA
If you use Windows 98/ME/NT, perform the following procedure
using the Configuration Utility provided on your system CD. If
you are using another operating system, you can configure the
TA using the firmware-based configuration utility or AT
commands. Procedures for both are described in the User
Guide.
Before you begin, verify your switch type and TEI with your local
ISDN provider and have that information readily available
1. When installing from CD, insert the MTA1 28ST/NT System
CD into your CD ROM drive. When the MTA128ST/NT
Terminal Adapter AutoRun screen is displayed, click on the
Config Utility icon. Follow the on screen directions to load
the Configuration Utility onto your PC.
2. When the Configuration Utility is loaded onto your pc, click
Start>Programs>ISDNTA Config Utility. The Welcome
screen is displayed.
Do you want the wizard to search for your ISDN TA? with the
Yes option enabled. Click Next to continue.
8
Advertisement
