DLF-72
®
RECOMMENDED ELECTRODE AND WORK CABLE
SIZES FOR ARC WELDING
(See Table A.1)
Tabulated below are copper cable sizes recommended for
different currents and duty cycles. Lengths stipulated are the
distance from the welder through work and back to the welder
again. Cable sizes are increased for greater lengths primarily for
the purpose of minimizing cable drop.
TRIGGER CONNECTOR
There is one circular connector for the gun trigger on the front of
the DLF-72.
Picture
C
B
E
A
D
WARNING
ELECTRIC SHOCK CAN KILL.
•
Do not touch electrically live parts.
Function
Pin
A
B
5 PIN TRIGGER
C
CONNECTOR
D
E
Wiring
GUN TRIGGER SWITCH SUPPLY
NOT USED
GUN TRIGGER SWITCH
DUAL PROCEDURE SWITCH
DUAL PROCEDURE SWITCH SUPPLY
A-3
INSTALLATION