Volkswagen Golf 2021 Owner's Manual page 31

Fig. 20 In the Infotainment system: Buttons for oper-
ating the Performance Monitor lap timer/stopwatch. The
buttons displayed vary depending on the current lap
timer/stopwatch activity.
You can access the lap timer/stopwatch in the Info-
tainment system by pressing the
button followed by the
Vehicle
tion keys.
OR: When the vehicle is not moving, press the
Infotainment button until the Performance Monitor
lap timer/stopwatch is displayed → page 26, Info-
tainment system operation and displays.
Function
Start or resume timing:
Pause timing:
End timing:
Start a new lap:
Cancel the current lap:
Infotainment
, , and func-
Sport
www.carobook.com
Action → fig. 19 and →
Tap the play button
If you tap the play button when the vehicle is not moving, a confirmation
message appears in the display. Tap
erwise, the timer starts automatically as soon as the vehicle moves forward.
If laps have already been completed and are recorded in the statistics, timing
will resume on the current lap.
A new first lap can only be started if the statistics are reset in the statistics
area. Tap the statistics button
timer, if necessary.
Tap the pause button
After tapping the pause button
to end timing.
6
Tap button .
8
Timing of the current lap is interrupted and a new lap begins. The time of the
completed lap is carried over to the statistics.
After tapping the pause button
Timing of the active lap ends and the lap time is deleted. It is entered in the
statistics as .
--:--:--.--
Infotainment system operation and displays
Tap the arrow buttons at either side of the screen to
toggle between the Performance Monitor sport
gauges → page 27, Performance Monitor sport
gauges and the lap timer/stopwatch.
Key to fig. 19 and fig. 20:
Stopwatch display
1
Digital split time display
2
Display of recent split times
3
Play button to start timing
4
Button to cancel the current lap
5
Stop button to end timing
6
Pause button to pause timing
7
Button to start a new lap
8
Button to show intermediate time in the stop-
9
watch display
Button to show statistics
10
Operating the stopwatch and lap timer
The stopwatch has two different measuring func-
tions. The stopwatch in the outer ring of the display
(with timer needle) → fig. 19
60 seconds. The digital display in the center of the
stopwatch shows the elapsed hours, minutes, and
seconds. The seconds appear as large numbers.
The digital display on the right side →
shows the current lap split time in 1/100 second in-
tervals. If the lap timer is not being used to track
split times, both digital displays show the same
time.
fig. 20
.
4
to begin timing immediately. Oth-
Start
to see lap statistics and reset the lap
10
.
7
to pause timing, tap the stop button
7
to pause timing, tap button
7
can measure up to
1
fig. 19
2
.
5
29