Quick Start Guide
Hardware Installation
Note: Disregard step 1 for model MT128ISA-UV only.
1.
Model MT128PCI-SD/SV and MT128ISA-UV adapters provide two
jumpers (JP1 and JP2) for the terminator setup. The default setting
is terminator enabled. Remove the JP1 and JP2 shorting plugs if
other ISDN devices (with adapters) are connected to the NT1.
Figure 2. Internal ISDN PCI Adapters
2a. Turn off the computer power and remove the PC cover.
2b. For ISA cards, select an empty ISA slot for the adapter. For PCI
adapters, select an empty PCI slot for the card. Remove the
expansion slot cover and save the retaining screw.
2c. Before handling the adapter, discharge any static on your body by
touching a piece of grounded metal, such as the computer chassis.
2
82072611.p65
Figure 1. Internal ISDN ISA Adapter
4
1/6/04, 11:36 AM