Table of Contents
Advertisement
Packet Power LLC assumes no liability for user's failure to comply with these safety
guidelines. Please read this entire manual carefully before proceeding.
This symbol is used throughout this manual to indicate critical safety
information. Failure to observe the information following this symbol may
result in injury or death.
CAUTION: This system and the area it is installed in may contain life threatening voltages.
Qualified personnel must disconnect all high voltage wiring before using or servicing the
BGS72.
3∿
The BGS72 will be pre-configured to support single-phase, split-phase or three-phase
power as indicated on the product's label. Only use the device with the indicated
voltage service type.
Do not apply or remove the current clamps from hazardous live conductors.
© 2021 Packet Power, LLC
Packet Power Multi-Circuit Monitor BGS72 User Manual V2.0
Page 3 of 30
Advertisement
Table of Contents
Need help?
Do you have a question about the BGS72 and is the answer not in the manual?