Intended Use
The wall router cuts slots for cables and pipes in all kinds of brickwork and
concrete, provided that suitable cutting discs, as described in this manual, are
used.
The machine is suitable for dry cutting only.
This machine has been developed for private use and is not designed for the
demands of industrial use.
Start-Up
Make sure that the mains voltage corresponds to the rated voltage of this
machine. Units rated with 230 V also can be used with 220 V power networks
and vice versa.
Before connecting the machine to mains power, make sure that it is switch off
to prevent unintentional starting.
First push the switch release button towards you (step 1). Then additionally
press the On/Off switch (2) to switch on the machine (step 2). A control
electronics unit slowly starts the machine (soft start). The machine must have
reached full speed before you begin to slit.
Start-Up
1
11
2