Mitsubishi Electric PEAD Series Service Manual page 53

DISASSEMBLY PROCEDURE
7. Heat exchanger
1. Remove the drain pan according to the procedure
in section 4.
2. Remove the heat exchanger cover according to
the procedure in section 5.2.
3. Removing the cover
(1) Remove the five fixing screws on the cover
(P) to remove it.
• Tighten screws to a torque of 2.0±0.2 N·m.
4. Removing the Heat exchanger
(1) Remove the fixing screws on the heat
exchanger (Q) to remove it.
• Tighten screws to a torque of 1.4±0.2 N·m.
HWE2109A
Exercise caution when removing heavy parts.
Fig. 14
(Q)
Fig. 15
53
(P)