Product Specifications; Battery And Charger - Ryobi RHT1851R40 Instructions Manual

PRODUCT SPECIFICATIONS

Cordless hedge trimmer
Model
Rated voltage
No-load speed
Stroke rate at no load
Blade length
Cutting capacity
Vibration level (in accordance with EN 62841-1 and EN 62841-4-2)
Vibration total value
Uncertainty of measurement
Noise emission level (in accordance with EN 62841-1 and EN
62841-4-2)
A-weighted sound pressure level
Uncertainty of measurement
A-weighted sound power level
Uncertainty of measurement
Weight without battery pack
Weight with heaviest battery pack

BATTERY AND CHARGER

Model OHT1851R
Battery pack -
Weight -
Charger -
RB18L13, RB18L15, RB18L15A, RB18L15B,
RB18L20, RB18L20A, RB18L25, RB18L25A,
Compatible
RB18L26, RB18L30, RB18L30A, RB18L40,
battery packs
RB18L40A, RB18L50, RB18L50A, RB18L60,
RB18L60A, RB18L90, RB18L90A
BCL14181V*, BCL14181H, BCL14183H, BCS618,
Compatible
RC18150, RC18150U, RC18627U, RC18120,
chargers
*BCL1418IV battery pack is compatible for charging in vehicles with
12 V DC outlets.
OHT1851R / RHT1851R50
Type 3 / RHT1851R40
Type 2
18 V d.c.
1 350 min
-1
2 700 spm
500 mm
18 mm
<2.5 m/s
2
1.5 m/s
2
81.0 dB(A)
3.0 dB
92.0 dB(A)
3.0 dB
2.7 kg
3.88 kg
RHT1851R40 RHT1851R50
RB1840C RB1850C
0.71 kg 0.83 kg
RC18115 RC18115
RC18115
WARNING! The declared vibration total values and the
declared noise emission values given in this instruction
manual have been measured in accordance with a
standardised test and may be used to compare one tool with
another. They may be used for a preliminary assessment
of exposure.
The declared vibration and noise emission values represent
the main applications of the tool. However, if the tool is used
for different applications, used with different accessories,
or poorly maintained, the vibration and noise emission
may differ. These conditions may significantly increase the
exposure levels over the total working period. An estimation
of the level of exposure to vibration and noise should take
into account the times when the tool is turned off or when it
is running idle. These conditions may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and noise, such as maintaining
the tool and the accessories, keeping the hands warm (in
case of vibration), and organising work patterns.