Adjust The Brake; How To Order Repair Parts - Chamberlain GJ Owner's Manual

Refer to illustration below. Tighten the screw until the spring compresses to the 1-1/4" dimension. Adjust screw
"A" until cone shaped stud just touches the two brake shoes as shown.
CAUTION: Do NOT over-adjust screw "A". If the cone shaped stud spreads the shoes, the brake will not
function correctly.
Set
Screw "A"
OUR LARGE SERVICE ORGANIZATION
SPANS AMERICA
INSTALLATION AND SERVICE INFORMATION
ARE AVAILABLE 6 DAYS A WEEK
CALL OUR TOLL FREE NUMBER – 1-800-528-6563
HOURS 7:00 TO 3:30 p.m. (Mountain Std. Time)
MONDAY Through SATURDAY
IN CANADA
CALL OUR TOLL FREE NUMBER – 1-800-654-4736

ADJUST THE BRAKE

Cone
Shaped Stud

HOW TO ORDER REPAIR PARTS

Brake
Shoe
1-1/4"
(+ or - 1/32")
Tighten Screw
to Adjust
Spring Compression
WHEN ORDERING REPAIR PARTS
PLEASE SUPPLY THE FOLLOWING INFORMATION:
PART NUMBER DESCRIPTION MODEL NUMBER
THE CHAMBERLAIN GROUP, INC.
Electronic Parts & Service Dept.
2301 N. Forbes Blvd., Suite 104
8
Spring
ADDRESS ORDER TO:
Tucson, AZ 85745