User Interface Controls; Process, Output Control - Yeswelder TIG-225P Operator's Manual

OPERATION
FIGURE 4
1. Amperage Display - Displays the current amperage
and sequencer setting
2. Status Lights - Power on, thermal fault, voltage
fault, internal fault
3. Control Knob - Used to set output current and to
adjust settings.
4. Process Select - Choose between Stick, Lift TIG,
High-Frequency TIG, Pulse TIG, Cold Spot TIG.
5. Sequencer - Allows control of options such as
preflow, starting current, slope, etc
6. Sequencer Control - Press to cycle through the
sequencer settings.
7. Output Control - Choose 2-Step, 4-Step
(See Figure 5)
1. Stick
2. Lift TIG
3. High-Frequency TIG
4. Pulse TIG
5. Cold Spot TIG
(See Figure 6)
FIGURE 6
11
FIGURE 5