OPERATION
(See Figure 2)
FIGURE 2
1.
User Interface - For selecting process and
parameters
2.
Control Knob - Used to control machine
output amperage and sequencer setting
3.
Twist - Mate Work Connector - For
connecting the work lead
4.
Torch Trigger Connector - Plug the 2 pin
torch trigger connector into this receptacle
5.
Twist - Mate Electrode Holder Connector -
For connecting the electrode holder
6.
TIG Torch Connector - For connecting the
TIG torch
(See Figure 3)
FIGURE 3
7.
Input Power Cord
8.
Power Switch - Controls power to the
machine
9.
Gas Inlet - Shielding gas connects to this
inlet
10.
Fan
10