Westmed Comfort Soft Plus Instruction Manual

Westmed Comfort Soft Plus Instruction Manual

Cannula high flow

Advertisement

0569
UNITS - 1
LENGTH - 2"
Rx Only

SUGGESTED PROCEDURE:

1. These products are intended for use in delivering oxygen therapy.
2. All products are to be used in accordance with the applicable prescription.
3. Remove the product from the package.
4. Attach the device to the oxygen source and make appropriate connection.
5. Refer to instructions on back side for connection to circuit.
6. Ensure that all connections are secure, and then start the gas flow.
7. Confirm appropriate function prior to use.
8. Check for gas flow throughout the device.
9. Discard after single patient use.
Westmed
5580 S. Nogales Highway
Tucson, Arizona 85706 USA
Phone: 800-975-7987
Fax: 520-294-6061
www.westmedinc.com
MT Promedt Consulting GmbH
Altenhofstr. 80
66386 St. Ingbert, Germany
Patents Pending
Product of Mexico
Assembled in Mexico
LABEL PN 75512, Rev. 01
Pediatric Nasal Cannula for use with flows up to 8 LPM.
Green Band on Cannula
CAUTION:
Use of sterilization or cleaning solutions
may leave this device nonfunctional.
Comfort Soft Plus
Cannula High Flow

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Comfort Soft Plus and is the answer not in the manual?

Questions and answers

Summary of Contents for Westmed Comfort Soft Plus

  • Page 1  Comfort Soft Plus 0569 Cannula High Flow UNITS - 1 Pediatric Nasal Cannula for use with flows up to 8 LPM. LENGTH - 2” Green Band on Cannula Rx Only CAUTION: Use of sterilization or cleaning solutions may leave this device nonfunctional.
  • Page 2 SUGGESTED USE: 1. Attach appropriate Westmed Cannula Adapter. 2. Connect small end of Adapter to High Flow Cannula. 3. Connect large end of Adapter to Circuit. 4. Prior to patient connection: Check that all connections are secure and confirm there is not leakage or occlusion of the system.

Table of Contents