Table of Contents
Advertisement
1
4 The power turns on and press a " ESC " button, then press " DISP " button on the remote control unit for
servicing.
5 Confirm a firmware release version.
A
6 Press " ESC " button on the remote control unit for servicing in order to exit the test mode.
[Tips]
(1)
If the power is not correctly turned on or when the power is shut off during update, proceed as follows before
performing update again:
• In a case where update was incorrectly terminated while "DOWNLOAD-2" was displayed on the FL display:
The SYSCON program will not function correctly.
If the program cannot be update from the disc or through serial communication, replace the MAIN Assy.
B
• In a case where update was incorrectly terminated while "DOWNLOAD-3" was displayed on the FL display:
The DRIVE program will not function correctly.
If the program cannot be update from the disc, replace the MAIN Assy.
• In a case where update was incorrectly terminated while "DOWNLOAD-4" was displayed on the FL display
The program for the tuner microcomputer will not function correctly.
If the program cannot be update from the disc, replace the TUNERCON microcomputer (IC101 : TUSB Assy).
C
D
E
F
84
1
2
DVR-LX60
2
3
3
4
4
Advertisement
Table of Contents
