Sharp CD-BK260V Service Manual page 15

TEST MODE
• Setting the test mode
Any one of test mode can be set by pressing several keys as follows.
<X-BASS> + <CD> + <POWER> TEST:CD operation test
<<MEMORY>>
key input
Adjustment result
automatically will
display as below
for each 2 sec :
a) "FOF_XXXX"
b) "TOF_XXXX"
c) "TBA_XXXX"
d) "TGA_XXXX"
f) "FGA_XXXX"
g) "RFL_XXXX"
explanation:
a) Focus off set = "FOF_XXXX"
b) Tracking off set = "TOF_XXXX"
c) Tracking balance = "TBA_XXXX"
d) Tracking gain = "TGA_XXXX"
f) Focus Gain = "FGA_XXXX"
g) RF level shift = "RFL_XXXX"
VOL — Last memory
BAL — CENTER
P.GEQ — FLAT
X-BASS — OFF
To cancel : Power OFF
All manuals and user guides at all-guides.com
Function: -CD test mode.
-Enter test mode.
C D
<< >>, <<
<<PLAY>> key input.
Do TOC IL. Do normal play
When these following key is input
into PLAY key, track number can
be appoint directly
<< 1>> key: Track 4
<< 2>> key: Track 9
<< 3>> key: Track 15
<<STOP>> key input.
STOP
XX: Hex value
– 15 –
CD-BK260V/CD-BK2700V/CD-BK280V
T E S T
>> buttons make pick's slide possible.
<<MEMORY>> key input.
Laser ON.
<<MEMORY>> key input.
Tracking OFF play at that
specific point.
<<MEMORY>> key input.
Tracking ON play from
that specific point.
Adjustment result auto-
matically will display as
below
for each 2 sec :
a) "FOF_XXXX"
b) "TOF_XXXX"
c) "TBA_XXXX"
d) "TGA_XXXX"
f) "FGA_XXXX"
g) "RFL_XXXX"
<<STOP>> key input.
Sliding the PICKUP with
<<
must only be in STOP mode.
IL isn't done
STOP
>>, << >> button