Product Introduction; Parts - Mitsubishi Electric PAC-WHS01WF-E Installation Manual

Mitsubishi Electric's Wi-Fi Interface is designed for communication to Mitsubishi Electric's Wi-Fi
service.
Third party Wi-Fi interface cannot connect to Mitsubishi Electric's Wi-Fi service.
Mitsubishi Electric is not responsible for any (i) underperformance of a system or any product;
(ii) system or product fault; or (iii) loss or damage to any system or product; which is caused by or
arises from connection to and/or use of any third party Wi-Fi interface or any third party Wi-Fi service
with Mitsubishi Electric equipment.

2. Product Introduction

No item
1 WPS switch
2 RESET switch It resets the system and ALL settings.
3 LED1 (Green) It shows the wireless communication state.
4 LED2 (Orange) It shows the PAC-WHS01WF-E state.
5 LED3 (Green) It shows the local communication state.

3. Parts

Interface unit
[with connecting cable
(5-core)]
Screw for mounting
3.5×16
Screw for mounting
4×16
4
Description
It activates WPS.
1
2
Mounting cord
1
clamp
Fastener
1
(for bundling the wires)
1
3
4
5
1
1