Table of Contents
Advertisement
Troubleshooting
Problem
Repeater will not register
with the Wireless System
Controller.
Solution
•
Ensure that the repeater AC adapter is plugged in to a reliable source.
•
Ensure that the Device Controller is powered and online.
•
Ensure that you are pressing the Discovery button.
•
Reposition the repeater closer to the Device Controller.
•
Try another location free of obstacles.
Make sure your Wireless System Controller indicates discovery mode and that the
repeater is powered from a reliable AC source. Press the Discovery button found on the
back side of the unit. If your mounting bracket is attached, remove it to find the discovery
button hole. If this continues to fail, you will need to try another location for the repeater.
You may also try a hard reset by holding down the Discovery button while powering on
the repeater. After resetting the repeater, please try to discover it again.
6
Advertisement
Table of Contents
