Table of Contents
Advertisement
• It is forbidden for people with pacemakers to enter the vicinity of the
machine.
• Protect the personnel working in the plant by taking appropriate measures,
such as erecting identifying markings, safety barriers and warning signs and
giving safety talks.
• Observe the nationally applicable health and safety regulations.
• Do not carry any magnetic or electronic data media.
1.5
Use in hazardous areas
Electrical systems in hazardous zones must be assembled, installed,
and operated by the applicable responsible persons in accordance with
the applicable rules and regulations.
Note
The basic requirements relating to electrical systems and their
operation in hazardous areas are described, for instance, in standard
IEC / EN 60079-14.
Ignition hazards
The assessment of operating risks and local operating conditions and the
necessary monitoring methods must be clarified and made binding by the
system operator in consultation with the responsible supervisory authority.
The required measures must be adhered to at all times. The machine
manufacturer cannot provide any generally applicable recommendations.
Please observe the information in these operating instructions.
Note
The basic requirements relating to the assessment of ignition hazards
arising from electrical equipment and their operation in hazardous
zones are specified in the IEC/EN 60079 series of standards.
If a third-party certification is available for the machine, then carefully comply
with the technical data defined in it and any special conditions.
The certificate must be available before commissioning.
67
Advertisement
Table of Contents
