Hardware Installation; Handheld Power-Up And Registration - Motorola MX240a User Manual

Hardware Installation

Action
1 Plug the USB connector at the end of the base
unit cable into an unused USB port on your
computer.
2 Place the base unit in any convenient location
away from your computer to prevent interference.
When the base is connected and the PC MX240a software
is running, a green icon (
area.
If the base is disconnected from your computer, a red icon
( ) appears in the taskbar status area. If neither icon
appears, launch the MX240a software.
Note: The handheld unit is portable and therefore is not
hardwired to the base unit or your computer.

Handheld Power-Up and Registration

To register the handheld unit to the base unit:
Action
1 Ensure the MX240a software is running on your
PC and the base is connected. To check this,
look for the green icon (
area of your computer screen.
2 Press and hold ª to turn on the handheld unit.
The Welcome screen displays and the power on
alert sounds.
) appears in the taskbar status
) in the taskbar status
17