Embedded Li-Ion Battery Motor Head; External Battery Pack Motor Head; Important Information On Deactivate & Temporary Sleep Modes - SOMFY BAT-R Programming Instructions Manual

1.2 Embedded Li-ion Battery Motor Head

Charging Charging
Port Port
Program Program
Button Button
The motor battery is fully charged prior to shipment and the motor is shipped in Deactivate mode.

1.3 External Battery Pack Motor Head

Program
Button
The rechargeable battery packs are fully charged prior to shipment and the reloadable battery wands are shipped
with eight (8) single-use AA lithium batteries.
1.4 Important Information on Deactivate & Temporary Sleep Modes
Prior to shipment, Insolroll fully programs each shade and places them in Deactivate mode for your convenience. Doing
this will eliminate any re-programming after the install is completed. All that you need to do is wake up the motor, pair
the transmitter to the shade and confirm the programmed limits. These modes are very useful when pairing multiple
shades to a single channel on a transmitter. Think through the pairing process for your application and read through the
complete instructions before you proceed to section 2.0 Wake Up Motor. More information on Deactivate and Sleep
modes can be found in section 8.0 Deactivate & Temporary Sleep Modes.
Battery Motor
Programming Instructions
Cable can only be inserted in one orientation (metal contacts
The battery pack cable can only be inserted in one orientation
(match the geometry of the connectors when connecting the battery
Charging
Cable
Page 3 of 14
Cable Orientation
must face toward the motor bracket side)
Cable Orientation
pack cable to the motor cable).