Others; Available Parts - Hitachi R-G570GS How To Use Manual

Table of Contents

Advertisement

TROUBLESHOOTING
When this happens
You feel electricity a little
when touching the main
body of the refrigerator.
Radio and/or television are
disturbed by noises.
There are thin lines like
scratches on the plastic parts.
There are waving and/or distortions on
the door surface, the side and the top
surface of the refrigerator.
There is a small hole
inside the door.
The electric supply failed.
The refrigerator is expected not
to be used for a long term.
Remove frost.
Transporting and moving care.
Glass is broken
door glass,
glass shelf
When a fruit fly, etc. enters
the refrigerator

AVAILABLE PARTS

■ If you order any part listed below, specify the model of your refrigerator to a dealer for purchasing genuine parts.
Subject
Ice smells
● Water filter may be old and dirty
(Replace it about every 3 or 4 years,
as a guide)
Vacuum state can't be maintained
● It may be damaged, deformed or
discolored.
70
Check Item
− − − − −
− − − − −
− − − − −
− − − − −
− − − − −
− − − − −
− − − − −
− − − − −
− − − − −
− − − − −
Are there fruit flies around it?
Is there any food with strong smell in the refrigerator?
Is the door left open for a long time?
Product Name
Water filter for the automatic
ice maker
Vacuum compartment gasket
(CONTINUED)
The refrigerator may be charged with static electricity, but there is no
problem with the safety.
It is caused by the electromagnetic radiation slightly generated from this
refrigerator. Install the refrigerator away from the television, radio and interphone.
It is recommended to connect the power plug to the power outlet separated
from the antenna terminal.
Those lines are caused by the liquid resin flowing when plastic is molded.
They are especially conspicuous for the transparent parts, but there is no
problem with the strength and they can never lead to any cracks.
Slight waving and/or distortions are generated in the manufacturing
process of the refrigerator. They may be conspicuous according to
the position of the light source and/or the brightness etc., which is not
malfunction. There is no problem with the performance.
This hole is used to escape the air inside when filling the heat insulation
material into the door during the production process. It is neither a flaw
nor abnormal thing.
* Some products have an adhesive seal to conceal the hole. Please do
not peel it off.
Reduce the number of times of opening and closing the door and avoid
storing food additionally until the electric supply is restored.
Please check each setting on the panel for operation after the power
comes back on.
Remove all the items in the refrigerator.
Unplug the refrigerator to take care of the inside or the automatic ice
maker.
Leave all the doors open to dry the refrigerator for 2 or 3 days.
Any operation to remove frost is not required because this refrigerator
remove frost automatically. Thawed water is collected in the evaporating
tray and automatically evaporates.
See "Transporting your refrigerator (transport for moving)"
Do not touch a broken glass, but contact your dealer for repair
soon.
Keep the environment clean.
Put something a fruit fly hates or fruit fly can get trapped in something
like that.
Cover food with the lid so that fruit flies can't be attracted by the smell.
Please close the door as soon as possible.
Model
Common for
RJK-30
all models
R-G570G type
R-XG5600G 311
R-G520G type
Action and Reasons
Hole (on a side of Refrigerator Compartment)
Hole (inside of the door)
Pg.60-63
Product Model
Pg.45

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

R-g520gsR-g520ghR-g520gm

Table of Contents