Three-Party Conference Call; Setting The Dial Mode - Motorola L903 User Manual

4. When the other handset answers by pressing
FLASH or /SPEAKER or the wireless headset
answers by pressing
the call. If the other handset or the wireless headset
does not answer, press
again.
NOTE
You are not allowed to use the wireless headset to initiate an
intercom call.
To transfer the call from handset to wireless headset, you
can also press on the headset to join the call, and then
hang up the call on handset.

3.14.3 Three-party conference call

1. During an external call, press INT.
- Your caller is put on hold.
2. Press VOL+ or REDIAL/VOL- to select the handset or
the wireless headset you want to call.
3. Press MENU to call the handset or the wireless headset.
4. When the other handset or the wireless headset
answers the intercom call, press MENU on the calling
handset to set up the conference call.
24
/
, press /BACK to transfer
/MUTE to talk to your caller
5. Press /BACK on any handset to end a three-party
conference call and leave the other handset or wireless
headset engaged with the caller or press
wireless headset to hang up and leave the other
handset engaged with the caller.
NOTE
During an external call, pressing
SPEAKER on any handset, or pressing
headset will join in the call and set up a conference call.
3.15

Setting the dial mode

The default dialing mode is suitable for your country and
network operator. It is unlikely that you should need to
change this setting unless advised to do so.
1. Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP BS
.
2. Press MENU to select
3. Press MENU and VOL+ or REDIAL/VOL- to select
PULSE
or .
4. Press MENU to save.
on the
/FLASH or /
on the wireless
DIAL MODE
.
Using the Phone
TONE