Operation - Motorola iDEN SYN7875 User Manual

Neckloop User Guide Page 16 Thursday, June 29, 2000 10:37 AM
To Remove:
1. Unplug the inductive cord by pinching together the two ends of the
inductive cord where they connect to the housing.

OPERATION

The neckloop is controlled by the phone. The neckloop becomes active
when plugged into the phone and the phone has been powered on.
Similarly, the neckloop turns off when unplugged from the phone or
when the phone is powered off.
You may need to set your phone to "vibrate" mode so that you are
alerted to any incoming phone calls. (Refer to your phone User's
Guide for instructions.)
14