Motorola V2288 User Manual page 72

          
Show Last Call
Press . Select the Quick Access feature (
Charge?).
Displays the cost of your last chargeable call.
Total For All Calls
Displays the cost of all your chargeable calls since the charge
meters were reset to zero using the 'Reset Call Charges' option.
Credit Remaining
Press . Select the Quick Access feature (
Credit?).
Displays the difference between your total call costs and the limit
specified by the 'Set Total Charge Limit' option. If there is no
limit, No Charge Limit Set will be displayed.
Show Call Timers
This feature allows you to display the duration of your calls and
to reset your time meters to zero.
If you receive the Advice of Charge service then all calls are
timed. If you do not receive the Advice of Charge service then,
depending on the model, either all calls or only outgoing calls are
timed.
English 70
Using the Options Menu
Show Last Call
Call Press . Select the Quick Access feature (
Timer?).
Displays the duration of your last call.
Total For All Calls
Displays the duration of all your calls since the time meter was
reset to zero using the 'Reset All Timers' option.
Reset All Timers
Sets the resettable time meters to zero. The Lifetime Meter is not
Show
resettable.
Set Audible Call Timers
Your phone provides two programmable audible call timers:
• The 'Single Alert Timer' will sound a beep just once during a
call, after a preset time has elapsed.
• The 'Repetitive Timer' will sound regular beeps during a call,
at preset intervals.
In both cases, the timers will sound their beeps ten seconds
before the end of the programmed time.
Set In-Call Display
This feature allows you to specify whether the time or charge
meters are displayed during a call. If you do not have the Advice
of Charge service, then only the time meter is available.
If a total charge limit has been set, then the in-call display
always shows your remaining credit.
Call