Advertisement
Figure 3
Model 04861 shown
1. Jam nuts
2. Brake cable
3. Retaining ring
2.
Remove the brake cable from the brake lever
as follows:
A.
Loosen a brake-cable jam nut
4) that secures the brake cable to the
upper-receiver weldment. Slide the brake
cable from the upper-receiver weldment.
B.
Remove the brake-cable spring from the
spring anchor on the brake lever. Note the
orientation of the brake-cable spring hook
on the brake lever for assembly.
g343088
4. Cable eyelet
5. Brake lever
(Figure
1. Nut
2. Brake handle
3. Shoulder bolt
3.
Remove the brake cable from the machine.
Note:
You may discard the brake cable.
4.
Remove the shoulder bolt and nut that secures
the brake lever to the upper-receiver weldment
(Figure
4).
Retain the shoulder bolt and nut for the
installation of the new lever.
3
Figure 4
4. Jam nut
5. Brake cable
g343372
Advertisement
