Table of Contents
Advertisement
j
Backlight
This option is used to control the display backlight. You can
specify any of three settings:
•
Normal
—backlight remains on for 15 seconds after you press
a key, receive an SMS or voicemail message, or receive an
incoming call
•
Continuou
s—backlight remains on indefinitely
•
Off
—no display backlight
j
Language Selection
This option is used to change the language for display messages.
The option has multiple settings.
When you select a language, all further display prompts and help
messages will be in the selected language.
Entry Method Selection
This option allows you to select the default entry method for
editing text on your phone. Press $ to display each of the
available options. Then press O to select the entry method you
require.
AIf iTAP software does not support the current language set
up for your phone, then only Tap is available. Your phone
displays
Not Available
See "Entering Text on Your Phone" on page 50.
78
Using the Options Menu
when you press $.
Battery Saving Mode
This option can help you to conserve battery power by activating
DTX (Discontinuous Transmission), turning the status indicator
off, and deactivating the backlight for incoming Cell Broadcast
messages.
The option has two settings:
Setup Internet
AAvailability of this feature depends on your service provider.
This option enables you to set up your internet access. For
information on using this option, see "Setting Up for Mobile
Internet Access" on page 41.
j
Select Keypad Tones
This option allows you to change or disable tones you hear when
you press a key.
The option has three settings:
No Tones
.
Phone Status
Status Review
This option can be used to view the current setting of menu
options.
When you select this option, your phone displays a list of menu
items which have been changed from the default setting. Press
the $ key to view the next item.
On
or
Off
.
Normal Tones
,
Single Tone
, or
Advertisement
Table of Contents
